The Installation And Use Of V-type Mixer

Source: Date: 2019.03.01 Clicks:

There are still many details in the installation and operation of the V Tumble Mixer. We need to pay attention to the details. It is helpful for us to maintain the V-type mixer and increase its service life.

1. Device: Place the machine stably, install the machine feet, and level the machine to make the mechanical energy work freely.

2. Before use, add oil to the fueling area, then carry out no-load work, check whether the fasteners are loose, whether the electrical is normal, whether the machine is working properly, and if it is abnormal, carry out renovation and debugging.

3. Turn the feeding port to the top and open the feeding cover for feeding. The feeding amount can't exceed the regular volume, then close the feeding cover and start the machine to work. If abnormality is found on the way, it is necessary to stop the machine.

4. It is necessary to rinse the inside and outside of the hopper in the replacement type.

V Cone Blender blockage

The V-type mixer feeds too fast and the load increases, causing blockage.

During the feeding process, always pay attention to the large deflection angle of the ammeter pointer. If the rated current is exceeded, it indicates that the motor is overloaded and overloaded for a long time, which will burn the motor. In this case, the door should be immediately reduced or closed, and the way of feeding can be changed. The feeder is controlled to increase the amount of feed.

V tumble mixer

Previous : BSP Ultra-fine Grinder Is Being Sent To Honduras

Next : What Should We Do To Improve The Efficiency Of The Mixer