V Tumble Mixer Clogging Cause

Source: Date: 2019.02.11 Clicks:

The V Tumble Mixer feeds too fast, the load increases, and it is easy to cause blockage.

During the feeding process, always pay attention to the large deflection angle of the ammeter pointer. If the rated current is exceeded, it indicates that the motor is overloaded and overloaded for a long time, which will burn the motor. In this case, the door should be immediately reduced or closed, and the way of feeding can be changed. The feeder is controlled to increase the amount of feed.

There are two types of feeders: manual and automatic. Users should select the appropriate feeder according to the actual situation. Due to the high speed of the V Cone Blender, the load is large, and the load is highly volatile. Therefore, the current when the mixer is working is generally controlled at about 85% of the rated current.

Previous : One Container Is Being Sent To Sudan

Next : Unique Performance Of The ACM Grinder